Robert Lewis Stevenson free essay sample

The most prominent literally devise used by Stevenson to create curiosity is the many narratives in the novella by different characters. Although most of the story is told from Mr. Utterson’s point of view (a lawyer and main figure), key parts of the story are told from Dr. Lanyon (friend of Mr. Utterson and Dr. Jekyll) and the ending by Dr. Jekyll (creator of the â€Å"personality-switch† potion and consequently Mr. Hyde). Furthermore, each narrative is transmitted to the reader by different media, such as story-telling, speech and letters. This means that the reader doesn’t just get one point of view of the events, but rather three, each of a different one. This makes the reader curious as to what each narrator will reveal about the happenings in the story and creates much intrigue. A second major devise used in the novella is character. The figure of Mr. Hyde and his secret identity is constantly chased by the main character (Mr. We will write a custom essay sample on Robert Lewis Stevenson or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Utterson) and is related to all important events in the story (from Dr. Jekyll’s will to Sir Danver’s murder). The reader is never properly described the outer appearance of Hyde since all the information resealed about him comes from second hands, â€Å"he is an extraordinary looking man†¦ I can’t describe him† (page 15). Furthermore the strange connection between Dr. Jekyll and Mr. Hyde (the protege of Dr. Jekyll) intrigues the reader even further, since Jekyll is regarded as a respectable man and Hyde a despicable one and Hyde’s strange disappearances seem to be connected to that of Dr. Jekyll, who claims to be â€Å"ill† though the reader finds out later he is not. Yet it is also through the use of contrasting imagery that Stevenson achieves intrigue in his novella. The main contrast is in the use of that of dark and light imagery, which is mainly present in the two â€Å"personalities† of Dr. Jekyll, the â€Å"good side†, himself, and his â€Å"bad side†, Mr. Hyde. The nature of both this characters’ actions varie from each other since Jekyll is portrayed as doing only good, â€Å"whilst he had always been known for charities, he was now no less distinguished for religion†¦Ã¢â‚¬  (page 40), whereas Hyde for evil, â€Å"the man trampled calmly over the child’s body and left her screaming on the ground†. Although Jekyll and Hyde are two separate identities and so therefore their actions, they do share one body, which challenges the reader and intrigues him as to how such thing is possible. However not only are literally devises used to create great curiosity by Stevenson, but also the very plot itself. Throughout the novella, many unanswered questions are left open until the very end of the story (â€Å"Henry Jekyll’s full Statement of the Case†), which the reader keeps asking himself throughout the novel. Questions such as â€Å"Who is Mr. Hyde? †, â€Å"How is Dr. Jekyll and Mr. Hyde connected? † and later â€Å"What is Dr. Jekyll hiding? † are constantly asked by the reader since they make the base for the plot. This makes the reader constantly curious and challenged, making him want to read further on to find out the answers. Throughout the novella â€Å"The Strange Case of Dr. Jekyll and Mr. Hyde†, Stevenson achieves great intrigue and curiosity on the reader’s part by using not only literally devises such as character and imagery, but also through media, such as narrative and rhetorical questions as well. It is through these that the novel manages to catch the reader’s immediate attention and make him want to keep on reading till the very end of the book.

The shrinking welfare state essays

The shrinking welfare state essays Welfare has been the topic of much controversy over the past few years. The welfare program has been important for many people. The purpose of welfare is to assist people who are jobless or cant make ends meet financially. One of the stated purposes of the Personal Responsibility Work Opportunity Reconciliation Act of 1996, popularly known as welfare reform was to end the dependence of needy parents on government benefits by promoting job preparedness, work, and marriage. To this end, this federal legislation, along with many other changes in state policies before and after passage, has increased incentives and requirements for families receiving benefits to move into work and eventually off welfare. After reading the article on the Shrinking Welfare State the question I asked myself was should there be a welfare reform? Personally I think welfare reform is more reasonable and feasible rather than abolishing welfare altogether. For one, the redistribution of wealth is necessary to maintain equality among the economic classes. The gap between the rich and the poor is widening each day, and welfare aids the redistribution of wealth. Secondly, doing away with welfare altogether would further impoverish those who are currently under it support. There is still a need for welfare, but amendments to its policies would reduce the cost of its upkeep as well as reduce welfare fraud. Such amendments to its policies can include a voluntary savings plan to reduce the amount of taxes paid or a limitation on the duration support. To do away with welfare altogether would increase the poverty level in the U.S. Though proponents of this movement site that many people take advantage of welfare, their argument is only half valid. No one denies, that welfare fraud exits, but doing away with welfare away altogether would hurt those residents who truly have a need for the support. Welfare reform can reduce fraud an...

Morality and God Essay Example | Topics and Well Written Essays - 1500 words

Morality and God - Essay Example First being the ontological argument that invokes the belief of the existence of a being that is all perfect, omniscient and powerful. It asserts that God is â€Å"that than which no greater can be conceived.† The second purported evidence that convicts the belief of the existence of God is the ‘cosmological argument’ which firmly asserts that something must have brought the universe in to being what it is; nothing can merely come into existence without having some force spurring it to existence (Murphy, 2011). The third purported truth is the argument from design which seeks to base the existence of God from the fact that the universe is ordered with forces and laws that complement each other giving support to the survival of human lives. This asserts that God made the universe with human being like us in mind. Another argument that seeks to prove the existence of God is the moral argument which asserts that we are all bound to act under some moral laws. Laws tha t tell us what to do. So who is it really that orders us to behave morally? The argument from design probably holds more water. Scientists have not even been able to come up with clear facts to explain evolution and how everything in the universe seems to co-exist naturally as though it was all pre-planned. It is therefore most likely that the creator intended to create a universe that could support life, because it could have had different matter laws to bar the existence but it didn’t. It thus preposterous to assert the existence of God impossible. The theory of evolution has been around for more than a century and has influenced the way people look at the world and proposes that they came in to being as a result of chance and they belong to a species group. The idea has gained momentum and the effects can be reflected in the development of bloody ideologies as people keep distancing themselves from the morality of religion. The theory of evolution has been put forward as a n imaginary hypothesis and to this day has not been backed up by any scientific experiment. Trials for this confirmation have further proven its invalidity. Nevertheless, many people have accepted the theory as fact like the law of gravity. Modern science however has proven in regards with the complexity of the human structure that it is quite impossible for life to come about as chance or emerge from natural conditions. What is the meaning of human life? To answer this question at all implies a religion. Social feelings are a source of the crystallization of religion. The desire for guidance, love and support prompts men to form the social or moral conception of God. This is the God of providence who protects, disposes, rewards and punishes. The God who according to the width of the believers outlook, loves and cherishes the life of the human race, or even for life as such, the comforter in sorrow and unsatisfied longing, who preserves the souls of the dead. This is the moral conce ption of God. We often arrive at a conception of the relation of science to religion is very different. When one views the matter historically one is inclined to look upon science and religion as irreconcilable antagonists, and for very obvious reasons. The people that believe in science and that really take the hypothesis of causality seriously are thoroughly convinced of the universal operation of the law of causation cannot for a moment entertain the idea of a ‘being’ who interferes in the course of happening events.

Business Law International Essay Example | Topics and Well Written Essays - 1000 words

Business Law International - Essay Example These measures were very useful in helping these economies to recover from the disastrous effects of the crisis. In dealing with the legal aspects associated with taking tough action against weak and insolvent banks based upon the precedents established during the Asian Financial Crisis, Head (1998) suggests a legal regime four specific measures. Firstly, there should be clear guidelines set out by the central bank in a particular country to identify when a bank is insolvent, for instance when it is unable to maintain adequate liquidity to meet the needs of depositors in a timely manner and/or when its liabilities exceed its assets. Head suggests that setting out rigorous tests for determining potential insolvency is a vial first step. Secondly, there should be a legal provision in existence which clearly sets out that if a bank is found to be insolvent or approaching insolvency, the central bank will appoint an administrator or conservator, that could also be the central bank itself, to take over the control of the bank and carry out an assessment to determine the bank’s prospects.(Head 1998). On the basis of the assessment, the conservator would offer recommendations to (a) restore the bank to health (b) merge it with a stronger bank or (c) liquidate its assets and distribute proceeds among depositors. Thirdly, if the bank is to be restored to a healthy form, the Conservator should be provided the powers under the law to carry out necessary procedures necessary to affect such a restoration. This could include measures such as powers to hire and fire bank staff, since inefficiency in bank operations is often the result of irresponsible or incompetent executives, as well as the power to change or modify the bank’s policies, close branches, change the bank’s charter or other operational measures that may be necessary to restore the financial health of the bank. Fourthly, the law

Political perspective to decision making Essay Example | Topics and Well Written Essays - 2250 words

Political perspective to decision making - Essay Example Organizational decision making takes place at different levels. Most of the crucial organizational decisions entail distribution of limited resources in the various departments or segments. They are significant in the identification of the most appropriate way to share resources. Due to scarcity of resources, political actions arise making the decision making process to have a political perspective. Most of the competition is usually exhibited by the organizations while searching for leadership and personnel positions that influence decision making. Political influence in decision making creates differences in the organizational dynamics making power to become a significant resource. Power enables those who hold it in an organization to have a substantial control in decision making. This essay discusses the political perspectives in decision making and their main implications. Organizations are usually an alliance of several individuals who have personal dreams expectations, weaknesses and strengths. These alliances are the fundamentals of the political perspectives, whose existence is attributed to the presence of division of labor in the business. According to Pettigrew (1985 p. 42), â€Å"associated career, rewards and individual status are the core sources of the political perspectives†. In his view, the occurrence of interest groups usually originates from the existence matching objectives within the group members. On the other hand, the differences that exist in the organizational hierarchy amongst the different groups facilitate the occurrence of the political perspectives. Differences come as a result of issues such as the members who have been newly recruited in the group and the pioneers, and others such as the traditionalists and those who want changes to be made in the organizational structures. The variations in opinions between these groups lead to the presence of sub units that are charac1terized by

Most Influential Socialist Thinkers Of Time

Most Influential Socialist Thinkers Of Time The philosopher, social scientist, historian and revolutionary, Karl Marx, is without a doubt the most influential socialist thinker to emerge in the 19th century. Although he was largely ignored by scholars in his own lifetime, his social, economic and political ideas gained rapid acceptance in the socialist movement after his death in 1883. Until quite recently almost half the population of the world lived under regimes that claim to be Marxist. This very success, however, has meant that the original ideas of Marx have often been modified and his meanings adapted to a great variety of political circumstances. In addition, the fact that Marx delayed publication of many of his writings meant that is been only recently that scholars had the opportunity to appreciate Marxs intellectual stature. It is difficult to know what effect this would have on his later philosophy, but we do know that Marx would be antithetical to religious belief, at one time pronouncing it, the opiate of the masses After schooling in Trier (1830-35), Marx entered Bonn University to study law. At university he spent much of his time socialising and running up large debts. His father was horrified when he discovered that Karl had been wounded in a duel. Heinrich Marx agreed to pay off his sons debts but insisted that he moved to the more sedate Berlin University. Educated in the best universities in Germany at Bonn, Berlin and Jena, he was greatly influenced by the most prominent scholar of the previous generation, Georg Wilhelm Friedrich Hegel. As youth turned to middle age, Karl Marxs views became more radical and finally hardened into the body of thought we know today. His journey to this point took him out of Germany where the newspaper he edited, the Rheinische Zeitung, was suppressed by the Government. He moved to Paris in 1843 and later to Brussels in 1845. Marx himself considered his theory of surplus-value his most important contribution to the progress of economic analysis (Marx, letter to Engels of 24 August 1867). It is through this theory that the wide scope of his sociological and historical thought enables him simultaneously to place the capitalist mode of production in his historical context, and to find the root of its inner economic contradictions and its laws of motion in the specific relations of production on which it is based Marx was partial to Hegel and his theories and was influenced by Hegels views that history was a dialectical process. He did not adhere to Hegels spirituality . He was also influenced by Fuerbach, Saint-Simon, Proudhon and Bakunin. While living in Paris, he began to associate with the working clasas for the first time. He began to formulate his thought that revolution was the key to achieving balance between the upper class and the working class. He wrote and spoke on social change through revolution. He believed that there was great energy between proleterians and capitalists. Marx began to appeal to more of the common people during the early depression days. American educatin became aware of soviet education reforms during the 1920s and through George S. Counts who visited Russia and brought their educational system of reform to light in America. But only a mere 10 years later, American educators did not think societ education was good. The theory associated with Marxism was developed in mid-19th century Europe by Karl Marx and Friedrich Engels. Although Marx and Engels did not write widely about education, they developed theoretical perspectives on modern societies that have been used to highlight the social functions of education and their concepts and methods have served to both theorize and criticize education in the reproduction of capitalist societies, and to support projects of alternative education. In this study, I will first briefly sketch the classical perspectives of Marx and Engels, highlighting the place of education in their work. Then, I lay out the way that Marxian perspectives on education were developed in the Frankfurt School critical theory, British cultural studies, and other neo- Marxian and post-Marxian approaches grouped under the label of critical pedagogy, that emerged from the work of Paulo Freire and is now global in scope. I argue that Marxism provides influential and robust perspectives on education, still of use, but that classical Marxism has certain omissions and limitations that contemporary theories of society and education need to overcome. The young Marx and Engels thus perceived that without education the working class was condemned to lives of drudgery and death, but that with education they had a chance to create a better life. In their famous 1848 Communist Manifesto, Marx and Engels argued that growing economic crises would throw ever more segments of the middle classes, and the older peasant and artisan classes, into the impoverished situation of the proletariat and would thus produce a unified working class, at least one with interests in common. They declared that the bourgeois class is constantly battling against the older feudal powers, among its own segments, and against the foreign bourgeoisie, and thus enlists the proletariat as its ally. Consequently, the proletariat gains education and experience which it can use to fight the ruling class. The Marxist approach to education is broad constuctivist and emphasises activity, collaboration and critique, rather than passive absorption of knowledge, emulation of elders and conformism; it is student-centred rather than teacher centred, but recognises that education cannot transcend the problems and capabilities of the society in which it is located. The Soviet, Chinese, and other Communist states were at most only partly structured along Marxist classless lines, and while such Communist leaders as Vladimir Ilyich Lenin, Joseph Stalin, and Mao Zedong staunchly claimed Marxist orthodoxy for their pronouncements, they in fact greatly stretched the doctrine in attempting to mold it to their own uses. The evolution of varied forms of welfare capitalism, the improved condition of workers in industrial societies, and the recent demise of the Communist bloc in Eastern Europe and Central Asia have tended to discredit Marxs dire and deterministic economic predictions. The Soviet and Chinese Communist regimes did not result in the disappearance of the state, but in the erection of huge, monolithic, and largely inefficient state structures. In recent years, many Western intellectuals have championed Marxism and repudiated Communism, objecting to the manner in which the two terms are often used interchangeably. A number have turned to Marxs other writings and explored the present-day value of such Marxist concepts as alienation. Among prominent Western Marxists were the Hungarian philosopher Gyà ¶rgy Lukaisand the Italian political philosopher Antonio Gramsci, both of whom viewed Marxism as a liberation from the rule of political economy and believed in its relationship to the social consciousness. Marxisms influence can be found in disciplines as diverse as economics, history, art, literary criticism, and sociology. German sociologist Max Weber, Frankfurt school theorists such as Theodor Adorno and Max Horkheimer, British economist Joan Robinson, German dramatist Bertolt Brecht, British literary critic Frederic Jameson, and the French historians of the Annales school have all produced work drawn from Marxist perspectiv es.

Personal Narrative - A Hole In One Essay -- Personal Narratives

A Hole In One It was a Saturday afternoon, and I was at golf practice. It was a gorgeous day. The sun was out, there was just a slight breeze, and there wasn’t a cloud in the sky. No one could have asked for a better day. Three of my teammates and I were golfing together. We teed off at one o’clock. Walking down the fairway of number one looked just like a scene out of a movie. The lake off to the right and a line of trees along the left, were just gorgeous. Number two is a one hundred and forty-two yard par three. I was kind of nervous because, of all of the times I had played the course, I had never hit the green. I debated for a moment, because the distance is right in between clubs. I finally decided on a seven iron. I would choke up on it and take a nice easy swing. I teed ...

Journal Analysis: Industrial Materials and Process

Increasing concern with fuel consumption leads to widespread interest in lightweight structures for transportation vehicles. Several competing technologies are available for the structural connections of these structures, namely welding, mechanical fastening/riveting, and adhesive technologies. Great interest is dedicated to welding of lightweight structures, particularly because of economic reasons derived of part count reduction, faster and cheaper fabrication, and possible weight gains.However, drawbacks of welding include variation of properties in the welcomed area, intrinsic metallurgical difficulties sibyl leading to unacceptable defects, as well as, from a mechanical design point of view, possibly detrimental fatigue behavior features associated with the continuous path of crack propagation. Crucial factors for the application of new technologies are the cost. Especially for the substitution of metals by light weight alloys beneath all technological properties of the economic aspects have to be considered.Currently the technological processes receiving more widespread interest in metallic lightweight structures are laser beam welding (LB) and friction stir welding (FSP). According to E. Schubert, M. Classes ET. AL Light weight components are of crucial interest for all branches that produce moving masses. The aim to reduce weight has to be accompanied by high production efficiency and component performance. Laser beam Joining offers the possibility to manufacture Joints of all light metals and their combination. Laser welding is a high energy beam process and in this regard is similar to electron beam.With that exception they are unlike one another. The energy density of the laser is achieved by the concentration of light waves not electrons. The laser output is not electrical, does not require electrical continuity, is not influenced by magnetism, is not limited to electrically conductive materials and in fact can interact with any material whether it be metal, plastic, wood, ceramic, etc. Finally its function does not require a vacuum nor are x-rays produced. Friction-stir welding (FSP) is a solid-state Joining process (the metal is not melted) that uses a third body tool to Join two facing surfaces.Heat is generated between the tool and material which leads to a very soft region near the FSP tool. It then eugenically intermixes the two pieces of metal at the place of the Joint, then the softened metal (due to the elevated temperature) can be Joined using mechanical pressure (which is applied by the tool), much like Joining clay, or dough. It is primarily used on aluminum, and most often on extruded aluminum (non-heat treatable alloys), and on structures which need superior weld strength without a post weld heat treatment.Methodology of the Researches According to the Journal of R. Brushstrokes et al. Joining technology of lightweight dissimilar metals between magnesium and aluminum alloys are essential for legalizing hybrid str ucture cars and other engineering application. In the present study, the normal center line welding of lap Joint was carried out by laser welding. It was found that the intervocalic layer formed near interface between two metals significantly degraded the Joining metal, which contributes to control thickness of intervocalic compound layer.Based on the result of FEM. analysis, the edge line welding of lap Joint was carried out, which could easily control the thickness of intervocalic layer and successfully obtained high Joining strength. In comparison with the Journal of R. Brushstrokes et al. According to T. Mortising et al. Macrostructure and mechanical properties of dissimilar welding Joint between AY alloy and MGM alloy by laser welding was very brittle because of building up MGM AAA intervocalic compounds in fusion zone.On the other hand, FSP is anticipated to welding dissimilar alloys AY alloys and GAZA magnesium alloy with various tool rotational speed and welding speed. These joints showed higher hardness in their stir zones than that of parent GAZA alloy because of MGM-AY inter metallic compound formation. Over, the harness of stir zone was lower than that of fusion zone of laser welding, and was changed with the welding parameter of tool rotational speed and welding speed. In accordance with R. Brushstrokes et al. O the problem of intervocalic compound, another approach to control intervocalic compound formation has to be developed for Joining magnesium and aluminum alloys. The controlling penetration depth of molten in lap Joint configuration might be a possible approach for reducing intervocalic compound formation, in the present study laser welding between agencies alloy GAZA B and aluminum AY-O was carried out. Since the penetration depth of molten metal in lap Joint will be one of important factor for controlling the thickness of intervocalic compound layer.Results and Findings of the Researches In accordance with R. Brushstrokes et al. After ten sile-shear tests, it was found that failure occurred inside intervocalic compound layer, which degraded strength of the Joint. The maximum failure load and strength obtained for the welding lap Joint were NON and 20 Amp. This failure load is about 37% of yield load of AY-O alloy. Results of the tensile test of T. Mortising et al. The tensile strength of base was 244 Amp in aluminum alloy and 241 Amp in magnesium alloy. The Joint efficiency was achieved 61% of the strength of the base material. FSP has several disadvantages.As it is a solid state process, a great amount of tool wear takes place during the plunging stage as the work piece material is cold at this time. Weld speeds in FSP are slower which can lead to time-consuming Joining process. As higher weld forces are required during this process, equipment used for FSP is massive and expensive. Moreover friction stir welding of high melting temperature materials, such as steel and stainless steel are known to have welding tool l imitations. Therefore, the use of standard FSP machines runs into high capital cost requirements and relatively poor productivity.LB has advantages precise working with exact placing of the energy spot, welding of complicated Joint geometry, low heat application, therefore minor changes in macrostructure, low thermal distortion, cavity-free welds, low post weld operation times, large working distance is possible ( welding up to 500 mm distance and also to inaccessible parts). And it's disadvantages are The welding plants are expensive, depending upon the equipment, If filler material is necessary they are, because of the limited amount produced, relatively expensive.Analysis and Recommendation of the Researches: It was difficult to obtain enough quality welding strength in welding lap Joint between magnesium and aluminum alloy plates due to intervocalic compound layer formation it was found that the edge-line welding lap Joint could realize the shallow penetration depth of molten me tal into lower plate, which would be effective for educing the reaction between two metal and then the formation of intervocalic compound.

Citation and Argumentative Research Paper

Kenned Taylor Evaluator: Angela Moore Title: Pro's and Cons of Abortion What was the thesis statement of the essay? Abortions, an unethical practice of termination should be illegal because it is considered murder, can cause physiological and medical problems, and reduces the number of adoptions. How was the introduction? Did it grab your attention? If so, how? If not, what could have been done differently? The introduction was good and it did grab my attention by showing interesting facts.Did the author make a strong case for their argument? What was the strongest argument that was made? Lacked evidence for the arguments, not strong enough arguments. What was the weakest argument made? Arguments were all kind of weak How well did the author Incorporate: Facts? Yes Anecdotes? No Quotes? There wasn't many quotes In the paper. How well did the author follow the PAP formatting and citation requirements? What could have been done differently? The PAP Format could use a little more work b ut overall it was fine.The reference page needs to be finished. How well did the author do with using correct grammar and punctuation? Were there any specific areas that he or she needs to work on for future papers? (Be specific) There were a few spelling mistakes and the sentences had much grammar (Passive 1 OFF Could you determine a Christian worldview in the paper? If yes, what was it? Yes there was a Christian world view, abortion is a sin. Did the conclusion wrap up the paper without introducing new information? Yes but you need to work on length.

A Book report on Celia, A Slave essays

A Book report on Celia, A Slave essays Celia, A Slave by Melton A. McLaurin In the book Celia, A Slave by Melton A. McLaurin, the accounts of one womans life are bound together in a vivid way to relay the circumstances surrounding a female slaves cruel life. The life of this woman named Celia was filled with acts of molestation, rape, murder, and eventual execution. Through the use of court records, correspondences, and newspaper accounts, the author delineated in chronological order the life of Celia: from her purchase by Robert Newsom to her execution on December 21, 1855. When Robert Newsom bought Celia from an unnamed person, the first night that he spent with her he raped Celia. This act was repeated numerously throughout the next five years. It is told to the reader that Celia almost certainly was purchased to replace Newsoms wife who had died months earlier. After years of sexual torment and abuse, Celia killed her master and burned his body to avoid being caught. However, she was caught, tried, and executed for her crime. This of course was not the whole story. Many factors come into play when explaining why Celia murdered Robert Newsom and determining the right course of action for her punishment. The factors influencing Celias behavior can be attributed to the years of rape sustained by Celia. In addition to the emotional instability that encourages Celia to murder Newsom is the ultimatum given by Celias lover, George, to quit the old man (30) or risk losing him as a companion. Also, many people had the opportunity to stand up for Celia and stop the abuse, but for personal reasons, those who knew of the crimes chose to remain quiet. All of these factors have the same thing in common: they each present a person or persons dealing with their own personal dilemmas. In the case of Celia, she could stand up to her master and face physical and emotional punishment and possibly death. It was a choice for h...

Case Studies 2 and 3 Essay Example | Topics and Well Written Essays - 1000 words

Case Studies 2 and 3 - Essay Example Applying the top down model to the issue, the major requirement is identified as providing shared access to all the employees to the resources in the company. This can then be broken down further into smaller requirements based on the issues faced by the employees (Goldman & Rawles, 2004). These requirements are listed below: The requirements identified are each broken further to simpler ones to arrive at the solution. The solution is to connect all the computers to one another and also to the Internet. In addition, provide the architects with access to files in the network. 1. Software: In order to form a network within the office, the Operating System should support the facility. Hence the current Windows 98 has to be upgraded to Windows 2000 Professional version as it is LAN (Local Area Network) ready. A Windows Server 2000 OS is installed in order to facilitate sharing files in a common server. 2. Internet Access: The current Dial – Up connection will not facilitate multiple connections at the same time. Hence it is replaced with an ADSL connection (which requires an access router and a DSL modem). 3. Printer Access: The Laser Printer needs to be attached to the Ethernet, so that any of the employees connected to the network can print the files (this is facilitated by the Windows Server 2000 OS). It is evident that the solution implemented by Lane Communications is a success, as the number of design contracts have increased. The main reason for this success is the increase in productivity of the employees. The architects and the layout artist can access the Internet at the same time reducing the idle time (when they had to wait for their turn earlier). File sharing and printing are also improved as the employees need not waste their time in storing in disks and transferring them twice. This will reduce the work load on administrative assistant who

Lake Wabarmun, Alberta Oil Spill 2005 Research Paper

Lake Wabarmun, Alberta Oil Spill 2005 - Research Paper Example The plant in some sources is said to be responsible for the existence of health standards made possible by the use of pesticides. Another source stated that 10% of India’s crop were saved by the use of the pesticides made in Bhopal. MIC is very toxic and only noticed when signs of toxicity appear such as watering of the eyes and nasal passages. It is the most toxic chemical belonging to the isocyanate family and at room temperature it is a colorless liquid (Varma, Roli, and Daya Varma, 2005). On December 2 a very small amount of water went through the pipes into MIC tank 610. The reaction generated heat which transformed the MIC liquid into a gas. Pressure in the tank increased; this ruptured the disc and the MIC vent began to discharge into the atmosphere. In Bhopal at the time MIC was stored in three tanks and tank 610 was 87% full, above the 60% recommendation for the Bhopal plant and 50% which was recommended for the Connecticut plant. Safety devices which were in place fo r such an emergency failed or were inadequate. There was no public warning system in place though a warning signal was activated at 2:30 am,2 hours after the leak was detected. It is estimated the MIC leak lasted from 45-60 minutes in duration. When the siren actually went into effect people had already began noticing the effects of the leak. Most of this was at first ignored as minor leaks were common. Police were unaware of what had actually happened and advised citizens to run which in turn exposed them to higher levels of inhaled MCI. On the morning of December 3 and subsequent days citizens were running to the hospital and deaths were attributed the first four days especially to pulmonary edema. Only house flies were unaffected by the MCI; presumably because they lie still at low levels. The effect of the MCI was a chemically induced SAR’s with little if any treatment options. It is estimated that 30,000 people were killed by the MCI and 500,000 more injured. The gas lea k has had far reaching consequences 25 years later and environmentalist have stated that the site still contains large amounts of chemicals which are toxic which they collected from soil samples at the site (Iyengar, Radhika, And Monisha Bajaj, 2011). Identified as one of the worst chemical disasters in history yet new attention was spurred by the Environmental Protection Agency Office of Toxic Substances to the dangers of chemicals which are stored as opposed to those on the environment. Water quality was questionable before the incident and during the period of time immediately following large tanks were filled from other parts of the city to supply residents with drinking water. There were over 500,000 registered victims of the Bhopal incident in 1984. Survivors continue to experience long term effects of the exposure; studies show cases of pulmonary fibrosis, asthma, COPD, emphysema, chest infections and other related conditions as lingering effects of the disaster (Kewal K. Mau dar, et al, 2009). Studies were carried out on 80,000 individuals. Rapid industrial growth in India today contributes to the economy but it comes with a price of environmental degradation and increased health risks to the public. Water quality is Bhopal today is under threat of pollution and in May of 2012 the factory was ordered to clean up